Camber Bolt Lancer Evolution 10 CZ4A Mitsubishi Front 2pc Set Aggressive Camber Low Stance Deep Rim Flush

From the seller

Beware of similar products and those without anti-loosening features.

Sales history: 6 years

Personal vehicle usage history: over 8 years (Alphard, Prius, Camry, Corolla, Stepwgn, etc.)

Please also check the number of reviews!

Made in Japan / Highest Strength: 12.9

Original design / Dedicated product

Dedicated nuts

Thick washers capable of withstanding high torque

With anti-loosening feature

All high-strength, heavy-duty!

For front use

Not for public roads; please use for events and photo shoots only.

Camber angle

2.5 degrees with one bolt per side

4-piece set available, please comment!

Approximately 4 degrees with two bolts per side (Obviously, please use for events/photo shoots, etc.)

Recommended for those who find adjustable camber insufficient!

Approximately 4 degrees with simultaneous installation

Recommended for those who have already lowered their vehicle and want a little more angle!

Consider introducing camber bolts in the following cases:

[1] For those with stock-style suspension, coilovers, or air suspension that don't allow camber adjustment.

[2] For those who want to improve the appearance and stand out.

[3] For those who want to tuck in tires and wheels that protrude from the fenders.

[4] For those whose camber angle is insufficient with the adjustment range of adjustable upper mounts.

In the above cases, installing camber bolts may solve the problem.

(※Always perform an alignment adjustment after adjusting the camber angle.)

Important Notes

This product is not road legal.

It does not maintain the same strength as the original equipment and is therefore prohibited for use on public roads.

We are not responsible for any accidents, malfunctions, damages, or breakage during installation or use. Please use at your own risk. Please purchase only if you understand and agree to these terms.

T10

T16

S20

LED

Carbon